|
********************************
*
SPECIAL NOTICE
********************************
* ALL
SOURCE HAS BEEN LOST v1.3.2 is the last release of WLAME
* WORM sound enhancements source will not be re-written, v1.3.2 is
* Fully featured, and still 100% compliant with Latest LAME Engine.
v1.3.2
R2
********************************
* Now
released with a very Optimised engine (3.97b3)
* Project is Feature Complete
v1.3.2
********************************
* New --ABR switch (temporary - in capitals, turns on ABR using -b as the
ABR.
* Less memory used.
* DEBUGGED - Re-worked and enhanced code. (Minor fixes)
* ETA Bugfix, is slightly more accurate, when no
load on machine!
* Now uses the enhancement model by WORM Sound Laboratories.
* New --strictly-enforce-ISO, makes output comply
to MP3 standard.
* Switches routines cleaned up and enhanced, preventing switches from being
ignored.
* Bugfix, no code for 160kbps as maximum bitrate, now been added.
* Now even clearer interface - looks clearer, and more stable on most
graphics adapters.
* Bugfix, Non-original was reported incorrectly.
* -private is now -PRIVATE. (Switch problems)
v1.3.1
********************************
* Added --nores switch support, disables bit
reservoir.
* Added --resample switch, manual re-sampling.
* Automatic fix re-sampling range.
* Bugfix "re-sampling to xxxHz"
use to display incorrectly.
* New third screen, if nothing to do.
* Now has complete useful functionality over the lame_enc.dll of current
version.
* New Warning system, if output is thought to be incompatible with some
players.
* Improved VBR model now in use.
* NEW ETA statistic, on all progress indicators.
v1.3.0
********************************
* Automatic Wave file settings detection, uses the WAV header.(Pre-release system)
* Minor Bugfix, meaning that re-sample stated even
if not.
* Ability to specify if file is RAW. (-r switch) if so use 44100hz Stereo
input by default.
* Minor Bugfix, if not re-sampling, estimated
size appeared on the wrong line.
* Now accepts commands like, wlame [switches] filein.wav fileout.mp3 [more switches]
* Switches may be entered before and after filenames.
* Bugfix, meaning re-sampling is not displayed if
not re-sampling.
* If a user enters an incorrect samplerate for a
.wav file, it is automatically corrected.
* -r switch also overides .wav automatic
settings. (For technical reasons)
* Is now compatible with LAME frontends (32-bit
GUI). Statistics may not be indicated.
* New -GUI switch, emulates the LAME screen output, for when using a LAME frontend.
v1.2.9
********************************
* Major Bugfix! Defaults, no longer used if an unrecognised switch occurs.
* Better switch handling code.
* Now states when using defaults (when drag over icon, and [wlame file.wav] at commandline)
* Improved interface statement and organisation.
* Switches are now 100% compatible with lame (-b192 & -b 192 will
work!)
* Now -B<bitrate> or "-B <bitrate>" to specify VBR maximum bitrate!
* Estimated filesize is now displayed (CBR only).
* Bugfix, preventing -b320 being recognised as -b32 & -B320 as -B32
* Fixes incorrect VBR ranges if invalid at commandline.
* Bugfix, auto re-sample can be incorrect when
using VBR.
* Auto re-sample updated for MONO actions too.
* If input is mono, using defaults, use 96 (50% of 192)
* -V<vbr quality> now turns VBR on
automatically, before, both were needed.
* Progress indicator re-newed - much better no
more stars and dots!
* -prog has now become -PROG because a switch bug
(-p was on if '-p'rog<1|2> was on.
* Now encodes to Joint Stereo by Default, using the High Quality Joint Stereo
Model.
v1.2.8
********************************
* Sample protection, if input is 48000, then output will be too. (Unless birate is too low!)
* Bugfix, meaning that most files were re-sampled
automatically to 44.1khz
* Automatic re-sampling, to provide the best quality!
v1.2.7
********************************
* New progress indicator. [*****......] 10.05%
* Selection between statistics or a progress indicator. (Progress is
default)
* Now approximately 10% faster (using standard settings) without quality loss.
v1.2.6
********************************
* Made the frequency switch compatible with LAME (-f -> -s) [-f doesn't
work anymore]
* CRC support was added (-crc or -p)
* -c option to copyright file.
* -o option to mark as non-original file
* -V option to select vbr quality
* -private option to mark as private file
* Interface clarified
* New switches help screen when nothing to do.
* Switches made compatible with LAME.
v1.2.5
********************************
* Filesystem bug fixed, meant problems with .aiff files and files with no extension.
* Command line switches can now be placed anywhere.
* Bugfixes new way of handling commandline switches - a lot of code! Lots of LOOPS!
v1.2.4 (Completed on the day England
beat Argentina
1 nil!) June 7 2002
********************************
* New filename system, output will be file.mp3 and not file.wav.mp3
* Improved interface for clarity.
* Ability to use Variable Bitrate functionality.
v.1.2.3 (Completed on the day England
beat Argentina
1 nil!) June 7 2002
********************************
* New press Enter to exit function at end of the encoding process.
* New Press Enter to exit code, works better!
* Ability to specify a bitrate from the commandline.
* Ability to specify an input frequency from the commandline.
* Ability to specify the input file's sound mode (stereo/mono etc)
* State's the bitrate.
* Support for bitrates 32 through to 320.
(Standard fixed bitstreams)
* Support for Stereo/JStereo/Mono input files.
* State's the input frequency.
* Comes with LAME Engine 3.92.
v.1.2.2
********************************
* New press Enter to Exit function if nothing to do.
* Added built in Enhancement models.
* Comes with LAME Engine 3.92
* Minor code enhancements/slight bug fix.
v.1.2.1
********************************
* Lame encoder used instead of Blade
* Various settings added to gain good results
* Program hugely simplified, started from scratch!
* Comes with LAME Engine 3.92
|
